10 Best Marking Knife For Woodworking Reviews 2022

Are you looking for the best marking knife for woodworking? Look no further! We have compiled a list of the top marking knife for woodworkings that are sure to meet your needs. Our list is based on customer feedback and expert ratings, so you know you are getting the best products available. Check it out now and find the perfect product for you!

The 10 Most Recommended Marking Knife For Woodworkings:

Our 10 Best Marking Knife For Woodworking Picks:

As we have already shared with you a list of the top marking knife for woodworking, you should be able to pick the right one for you pretty easily. However, if you are looking for detailed description of what each product does, read on as we go one by one in detail.

1. Narex Thin Blade Dual Double Bevel Striking Marking Knife...

Narex Thin Blade Dual Double Bevel Striking Marking Knife...
  • Marking/striking knife is manufactured by small and highly respected edge tool maker in Czech Republic
  • Blade made from highly allowed Mn-V steel and heat treated to HRc 61
  • Blade is .055" thick and .410" wide
  • Double bevel sharpened at 20 degrees and tip ground to 55 degrees.
  • Blade length is 1.5" long and handle is 5.25" long, overall length is 6.75"

2. Narex Dual Bevel Marking Knife Stainless Steel Blade...

Narex Dual Bevel Marking Knife Stainless Steel Blade...
  • A marking knife is an invaluable tool that should be in the toolbox of every woodworker. A good marking knife can produce crisp and well-defined marks on wood essential when laying out precision joinery or transferring measurements. Scribe lines left by a marking knife can also locate and guide chisels and saws. This Dual Bevel Spear Point marking knife is made by Narex, a world-class edge tool manufacturer in the Czech Republic.
  • The blade is made from AISI 420 corrosion resistant stainless steel and hardened and tempered to HRC 57. The blade is 1-7/8 inches long, 1/2 inch wide and comes in 3 thicknesses, 0.030", 0.060" or 0.100 inch thick. The blade has a dual-bevel spear point tip. The tip is ground to 55 degrees with a 25-degree grind on both bevels. The bevels are precision ground on CNC machines.
  • The dual bevel will mark distinct lines on both the right and left side of a part or guide. It will leave crisp lines when marking with and against the grain and on end grain. The knife may require just a light stropping to remove a small wire edge to get it razor sharp and ready to use.
  • The laser cut finger indents are useful for applying pressure closer to the tip. The blade is the perfect tool to make marks in narrow recesses such as when transferring pins/tails marks during dovetailing.
  • The handle is 3/8-inch-thick and made from Mexican Rosewood which has been hand sanded and polished. The scales are attached to the blade via two brass pins. The handle makes the perfect size for a nimble yet stout marking knife. The square handle profile prevents the knife from rolling off the bench.

3. KAKURI Kiridashi Knife Right Hand 18mm, Professional Razor...

KAKURI Kiridashi Knife Right Hand 18mm, Professional Razor...
  • JAPANESE KIRIDASHI MARKING KNIFE: Kiridashi Knife is a Japanese hand-forged utility knife for woodworking, bamboo craft, whittling, marking, deburring, pencil sharpening, paper cutting, leathercraft, and so on. The handy portable size is convenient for camping and outdoor as well. It is also used for bonsai (bonsai knife) and garden trees as a grafting tool in Japan.
  • BEAUTIFUL HAND-HAMMERED DESIGN: Non-slip body with a beautiful forged hammered pattern. Blacksmith hammers it one by one. You can use it for a lifetime by sharpening the blade. This is the ultimate knife for professional carpenters and DIYers alike to use for a long time.
  • RAZOR SHARP JAPANESE STEEL: Only Japanese high-grade steel is used. The blade is razor-sharp and durable, and you can restore the sharpness by sharpening with a whetstone. All KAKURI brand products are manufactured in Japan and handcrafted by Japanese professional craftsmen.
  • OFFICIAL ENGLISH INSTRUCTION: KAKURI Official English instruction is included.
  • PRODUCT SPECIFICATIONS: Made in Japan / Material: Japanese high carbon steel / Size: 0.7"×7.3"×0.1" / Blade Width: 0.7" (18 mm) / Cutting Width: 1.9"

4. Clarke Brothers Wheel Marking Gauge - Woodworking Marking...

Clarke Brothers Wheel Marking Gauge - Woodworking Marking...
  • ✅ PATENT PENDING - ROLL STOP FENCE WITH FLAT SPOT - woodworking tasks with a high-end wheel marking gauge, which will help you lay out lines parallel to a flat wood surface with max precision and indicate exactly where wood needs to be cut.
  • ✅ MAKE LINE MARKS WITH PRECISION: The super clear, laser engraved graduation marks on the bar are available in both metric and imperial versions up to 6''/150mm, for convenience in your woodworking projects.
  • ✅ INVEST IN A MONEY SAVER MARKING WHEEL KIT: The 2 extra hardened Steel wheel cutters included add great value to your order. Eliminate the chances of wavering lines and complete your tasks faster and easier.
  • ✅ USE YOUR WOODWORKING SCRIBE FOR YEARS: The 8" long graduated bar is made of solid brass, Steel and aluminum alloy, corrosion-resistant. The non-marring brass face protects it from damage when not in use.
  • ✅ ENJOY ONE-HANDED OPERATION: Fast and easy to use, this convenient marking gauge wheel will take all the fuss out of your woodworking cutting. Feeling perfectly balanced, our wood marking tool won’t strain your hand.

5. Mikov V2003010 Thin Blade Dual Bevel Marking Knife with...

Mikov V2003010 Thin Blade Dual Bevel Marking Knife with...
  • This Dual Bevel Spear Point marking knife was made to our specifications by Mikov a world-class Czech knife maker. Mikov is currently the largest knife maker in the Czech Republic and has been making knives since 1794.
  • The blade is made from AISI 420 corrosion resistant stainless steel and hardened and tempered to HRC 57. This is the same steel used in many of Mikov’s kitchen knives and is designed to take and hold a keen edge resist corrosion.
  • The blade is 1-7/8 inches long, 1/2-inch-wide and 0.060 inch thick. The blade has a dual-bevel spear point tip. The tip is ground to 55 degrees with a 25-degree grind on both bevels. The bevels are precision ground on CNC machines. The laser cut finger indents are useful for applying pressure closer to the tip.
  • The blade is the perfect tool to make marks in narrow recesses such as when transferring pins/tails marks during dovetailing. The dual bevel will mark distinct lines equally well on both the right and left side of a part or guide. It will leave crisp lines marking with and against the grain and on end grain. The knife may require just a light stropping to remove a small wire edge to get it razor sharp and ready to use.
  • The handle is made from Mexican Rosewood which has been hand sanded and polished. The scales are attached to the blade via two brass pins. The handle is 3/8-inch-thick makes the perfect size for a nimble yet stout marking knife. The square handle profile prevents the knife from rolling off the bench.

6. Clarke Brothers Marking Knife – Wood Marking Gauge –...

Clarke Brothers Marking Knife – Wood Marking Gauge –...
  • PATENT PENDING - OPTIMAL SOLUTION: Creating unique and durable wooden pieces is easier with the Clarke Brothers marking knife! This practical woodworking tool can be used to scribe lines that are to be followed by a hand saw or chisel, allowing you to create beautiful woodworking joints and designs.
  • MADE TO LAST: Our stunning wood marking tool features a premium double-edged blade that you can use with both hands for a better grip, more precision and better control. The ultra-durable Carbon steel blade can be used on all sorts of wood, including hardwood such as cherry and ash.
  • PRACTICAL & RELIABLE TOOL: This wood scribe tool has a durable blade made with 100% high-quality carbon steel. It is very strong and durable, being a great accessory for edge retention that reduces the time required for edge maintenance. The added level of sharpness ensures more precision and accuracy when marking. The amazingly sharp edge will remain intact even after many uses.
  • SUPERB DESIGN: Our wood marking knife is not only very practical and durable, but also elegant and classic. It features a simple, vintage and exotic Padauk wood handle with our brand name and logo for more personality. The handle ensures a comfortable grip that allows you to mark wood easier and quicker.
  • FOR YOUR FRIENDS: Get this premium wood marking tool for yourself or as a thoughtful and elegant present for your family and friends. Surprise a great handyman or woodworker with a durable and long-lasting accessory that they will cherish forever.

7. Big Horn 19061 Marking / Striking / Scribing Knife Red,...

Big Horn 19061 Marking / Striking / Scribing Knife Red,...
  • Double beveled for both right and left hand Scribing
  • This knife can draw a much finer line than an awl or pencil
  • Blade is beveled on one side only to keep the cut absolutely tight to your rule or square
  • Defines an exact line for starting a chisel or saw blade

8. Narex Unhandled Dual Bevel Marking Knife Kit with Finger...

Narex Unhandled Dual Bevel Marking Knife Kit with Finger...
  • A marking knife is an invaluable tool that should be in the toolbox of every woodworker. A good marking knife can produce crisp and well-defined marks on wood essential when laying out precision joinery or transferring measurements. Scribe lines left by a marking knife can also locate and guide chisels and saws. This Dual Bevel Spear Point marking knife is made by Narex, a world-class edge tool manufacturer in the Czech Republic.
  • The blade is made from AISI 420 corrosion resistant stainless steel and hardened and tempered to HRC 57. This steel is a traditional knife steel and designed to take and hold a keen edge and resist corrosion. The blade is 5-7/8 inches long, 1/2 inch wide and come in 3 thicknesses: 0.030", 0.060" or 0.100 inch thick.
  • The blade has a dual-bevel spear point tip. The tip is ground to 55 degrees with a 25-degree grind on both bevels. The bevels are precision ground on CNC machines. The laser cut finger indents are useful for applying pressure closer to the tip.
  • The dual bevel will mark distinct lines on both the right and left side of a part or guide. It will leave crisp lines when marking with and against the grain and on end grain. The knife may require just a light stropping to remove a small wire edge to get it razor sharp and ready to use.
  • The knife can be used either unhandled or wood scales can be attached to create a handle. If a handle is desired the kit comes with 2 brass pins to affix scales to the blade.

9. Marking Knife Woodworking Marking Knife Thin Blade Dual...

Marking Knife Woodworking Marking Knife Thin Blade Dual...
  • Material: the blade of striking knife is made of manganese steel with faux mahogany handle, the knife edge is pointed and the handle is comfortable to hold, make it easy for you to use
  • Size: the blade length is 2.4 cm/ 0.94 inches and the handle is 11.5 cm/ 4.53 inches long, the total length is 13.9 cm/ 5.47 inches, easy to hold on for you
  • Wide use: the wood handle is sealed, and the blade is peaked; Dual bevel design is nice as it allows marking from either direction; This is a useful tool for a beginner's tool box, to learn how to use a marking knife for more serious woodwork
  • Built to last: the marking knife blade is made from steel and comes pre-oiled for better strength and longevity; We recommend applying lubrication when uses (optional, not included); This dovetail marking knife comes peaked and can be additionally honed to make it more pointed
  • Cautious: the blade is pointed; Remember to protect it when not in use to avoid accidental injury; However, due to the artificial cutting in the production process, some products may not be very peaked, you can grind the knife to solve the problem

10. Marking Knife Woodworking Marking Knife Thin Blade Dual...

Marking Knife Woodworking Marking Knife Thin Blade Dual...
  • Material: the blade of striking knife is made of manganese steel with faux mahogany handle, the knife edge is pointed and the handle is comfortable to hold, make it easy for you to use
  • Size: the blade length is 2.4 cm/ 0.94 inches and the handle is 11.5 cm/ 4.53 inches long, the total length is 13.9 cm/ 5.47 inches, easy to hold on for you
  • Wide use: the wood handle is sealed, and the blade is peaked; Dual bevel design is nice as it allows marking from either direction; This is a useful tool for a beginner's tool box, to learn how to use a marking knife for more serious woodwork
  • Built to last: the marking knife blade is made from steel and comes pre-oiled for better strength and longevity; We recommend applying lubrication when uses (optional, not included); This dovetail marking knife comes peaked and can be additionally honed to make it more pointed
  • Cautious: the blade is pointed; Remember to protect it when not in use to avoid accidental injury; However, due to the artificial cutting in the production process, some products may not be very peaked, you can grind the knife to solve the problem

Best Marking Knife For Woodworking Buying Guide

This is a guide to help you make the best decisions when buying marking knife for woodworkings. It has been compiled from the most comprehensive and up-to-date information available so that you can be confident in your purchase. The guide includes tips on how to choose marking knife for woodworkings for different uses – whether it is for professional, home, or DIY use, there is something here for everyone!

Build Quality

One of the most important factors to consider when choosing a marking knife for woodworking is its build quality. How well does the product seem to be made? Is it likely to fall apart after a few uses? Are there any areas that feel flimsy or weak? It is important to consider these things before making your purchase, as you do not want to end up with a product that is difficult to use or falls apart after just a few uses.

Brand Reputation

Another important factor to consider when choosing a product is its brand reputation. How well-known is the company that makes the product? What are people saying about it online? Is the company known for making high-quality products, or are they known for producing products that do not work very well? It is important to do your research before buying a product, especially if you are unfamiliar with the brand.

Ease of Use

How easy is the product to use? Is there an instruction manual that comes with it, or do you have to look online for instructions on how to use the product effectively? Does everything work as well as it should in order for this product to be effective? The easier a product is to operate and maintain, the better. You do not want to have to struggle to figure out how to use it or spend a lot of time trying to keep it in good condition.

Durability

How durable is the product? Will it last for a long time, or will it start to wear down after just a few uses? Is it likely to break if dropped? These are important factors to consider when choosing a product, as you do not want to have to replace it often.

Versatility

How versatile is the product? Can it be used for a variety of purposes, or is it only good for one specific task? If you are looking for a product that can be used for multiple things, make sure to choose one that is versatile. This will save you from having to buy multiple products to complete different tasks.

Comfort in Use

How comfortable is the product to use? Does it cause any pain or discomfort when used, or is it easy on the hands and/or eyes? If you are going to be using the product frequently, it is important that it be comfortable in order to avoid any unnecessary pain.

Maintenance Free

How much maintenance is required for the product? Does it need to be cleaned often, or is it low-maintenance? Can you just use it and forget about it, or do you have to take special precautions in order to keep it working properly? If you are looking for a product that does not require a lot of maintenance, make sure to choose one that is low-maintenance.

Consider Budget

Another important factor to consider when choosing a product is its price. How much money are you willing to spend on this purchase? Is the product worth the price tag, or are there cheaper alternatives that will

Warranty Period and Type

Is there a warranty on the product? What type of warranty does it have? Is it full, limited, or has no warranty at all. If you are looking for a reliable product, make sure to choose one with good customer service and returns policies in case something goes wrong with your purchase.

Aesthetics

Another important factor when choosing a product is its aesthetics. How does the product look? Is it something you would be proud to own and display in your home or office, or is it an eyesore? If you are looking for a product that has good aesthetics, make sure to choose one that looks nice.

Final Thoughts

This is our list of what we believe are the most important factors that will help you find just the right product for yourself or someone else: Build quality, ease of use, longevity, warranty, price, and most important? Does the product provide value for money?

Last update on 2022-08-08 / Affiliate links / Images from Amazon Product Advertising API